Door fittings

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Backplates are assembled by using screws M6 and welded bolts on the outer backplate.

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

For room-to-room doors with 40-43 mm thickness where  one side needs to be locked.

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

For room-to-room doors with 40-43 mm thickness where  one side needs to be locked.

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

For WC and lavatory doors with 40-43 mm thickness.

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

The shield connection is secured by three M6 screws and pinned studs on the outer shield. Door thickness: 50 -55 mm

Backplates are installed with wood screws. Door thickness: 38-52 mm

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Special PVD antibacterial surface finish PROTECTCOMP on the basis of active silver.
Prevents the multiplication of pathogenic bacteria and moulds on the surface of handles and shields.
The surface finish has increased resistance against the scratching and abrasion and it provides the antibacterial

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Backplates are assembled by using screws M6 and welded bolts on the outer backplate.

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Backplates are assembled by using screws M6 and welded bolts on the outer backplate.

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Suitable for inner or exterior doors with higher frequency of passages.
High durability, tested to 200 000 cycles. 
Reinforced construction of the steel underplates.
The lever handle is firmly attached to the plate. 
The lever handles is spring loaded.
Side orientation of the lever handle right or left

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.

This fitting is suitable for interior doors.

Fittings suitable for interior doors.

Fittings designed for interior doors

ELEGANT/SNH door  fittings are suitable for doors with 38-52 mm thickness. For doors with thickness greater than 52 mm, please contact your seller – a longer spindle will be required. This door fitting has concealed connecting components (screws).  

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Fittings suitable for interior doors.  

Fittings designed for interior doors  

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Fittings suitable for interior doors.

REAL/S door  fittings are suitable for doors with 38-52 mm thickness. For doors with thickness greater than 52 mm, please contact your seller – a longer spindle will be required. This door fitting has concealed connecting components (screws).  

Fittings designed for interior doors

Fittings designed for interior doors  

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Fittings designed for interior doors

Fittings designed for interior doors

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

Fittings designed for interior doors

Fittings designed for interior doors

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.  

 Fittings designed for interior doors

Door hande is as well made in handle-pull handle variant.

Fittings designed for interior doors

Fittings designed for interior doors

Fittings designed for interior doors

Fittings designed for interior doors

Steel brace body. Classification according to EN 1906. Connecting material made of stainless steel.