Security fittings Class 3

Stainless steel security fitting for entrance doors,  suitable for inwards as well as outward opening doors with door leaf thickness of 40 - 50 mm, further extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Use mortise lock with backset 80 mm and through holes enable to install

Self luminous LUMINO knob incorporates glass capillary filled with tritium glass. Visible up to 15 m in the dark. Maintenance free, without external energy source. Operation life 15 years. Suitable for outdoor use.

Compactable with wide range of mortise locks. Suitable for escape routs according to EN 179. High durability, tested to 200 000 cycles. Each handle is firmly attached to the plate. With square split spindle 8×8mm, included spidle reduction 9×9mm(10×10 mm on request). Spring loaded handles on both

Compactable with wide range of mortise locks. Suitable for escape routs according to EN 179. High durability, tested to 200 000 cycles. Each handle is firmly attached to the plate. With square split spindle 8×8mm, included spidle reduction 9×9mm(10×10 mm on request). Spring loaded handles on both

Stainless steel security fitting for entrance doors opening inward as well as outward, suitable for door leaf thickness of 38 – 50 mm, extensions per 5 mm up to 100 mm available. Fastenning material for thicker doors. We recommend to use profile cylinder  resistant to drilling.      

Stainless steel security fitting for entrance doors opening inward as well as outward, suitable for door leaf thickness of 38 – 50 mm, extensions per 5 mm up to 100 mm available. Fastenning material for thicker doors.
We recommend to use profile cylinder  resistant to drilling.
Available with SQUARE

Stainless steel security fitting for entrance doors,  suitable for inwards as well as outward opening doors with door leaf thickness of 40 - 50 mm, further extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Use mortise lock with backset 80 mm and through holes enable to install

Stainless steel security fitting for entrance doors,  suitable for inwards as well as outward opening doors with door leaf thickness of 40 - 50 mm, further extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Use mortise lock with backset 80 mm and through holes enable to install

Stainless steel security fitting is suitable for inwards as well as outward opening doors with door leaf thickness of 38 - 50 mm, extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Cylinder must not protrude above the door surface more than 15,5 mm.

Stainless steel security fitting for entrance doors,  suitable for inwards as well as outward opening doors with door leaf thickness of 40 - 50 mm, further extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Use mortise lock with backset 80 mm and through holes enable to install

Stainless steel security fitting for entrance doors,  suitable for inwards as well as outward opening doors with door leaf thickness of 40 - 50 mm, further extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Use mortise lock with backset 80 mm and through holes enable to install

Stainless steel security fitting for entrance doors opening inward as well as outward, suitable for door leaf thickness of 38 – 50 mm, extensions per 5 mm up to 100 mm available. Fastenning material for thicker doors. We recommend to use profile cylinder  resistant to drilling.  

Stainless steel security escutcheon is delivered without profile cylinder. It is suitable for inwards as well as outward opening doors with door leaf thickness of 40 – 50 mm, extensions per 5 mm up to 100 mm available.
Use a mortice lock with depth of 80 mm and through holes  with diameter of 8 mm

Stainless steel security fitting for entrance doors opening inward as well as outward, suitable for door leaf thickness of 38 – 50 mm, extensions per 5 mm up to 100 mm available. Fastenning material for thicker doors.
We recommend to use profile cylinder  resistant to drilling.
Available with SQUARE

Stainless steel security fitting is suitable for inwards as well as outward opening doors with door leaf thickness of 38 - 50 mm, extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Cylinder must not protrude above the door surface more than 15,5 mm.

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

Security fitting RX is suitable for inwards as well as outward opening doors with door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Adjustable upper bolt for extended fixing position. Two high strength bolts M8.

Cylinder must not protrude

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

Security fitting RX is suitable for inwards as well as outward opening doors with door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Adjustable upper bolt for extended fixing position. Two high strength bolts M8.

Cylinder must not protrude

These security fittings are delivered:
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available (Fastenning material)

Cylinder must not protrude above the door surface more than 15,5

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

Security fitting RX is suitable for inwards as well as outward opening doors with door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Adjustable upper bolt fotr exdended fixing position. Two high strength bolts M8.

Cylinder must not protrude

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

Security fitting RX is suitable for inwards as well as outward opening doors with door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm. Fastenning material for thicker doors. Adjustable upper bolt for extended fixing position. Two high strength bolts M8.

Cylinder must not protrude

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

These security fittings are delivered:
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available (Fastenning material)

Cylinder must not protrude above the door surface more than 15,5

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 40 – 50 mm, extensions per 10 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

Compactable with wide range of panic mortise locks. Suitable for escape routs according to EN 179. With square split spindle 8×8mm, included spidle reduction 9×9mm(10×10 mm on request). Lever handle-knob-one spring, handle-hadle-two springs. set is working only doors openning outwards. Side orientation

FASTENNING MATERIAL SECURITY FITTINGS 802, R1 door leaf thickness 38-55 mm,
FASTENNING MATERIAL SECURITY FITTINGS 802, R1 door leaf thickness 56-70 mm,
FASTENNING MATERIAL SECURITY FITTINGS 802, R1 door leaf thickness 71-85 mm,
FASTENNING MATERIAL SECURITY FITTINGS 802, R1 door leaf thickness 86

FASTENNING MATERIAL SECURITY FITTINGS  807, R4 door leaf thickness 38-55 mm,
FASTENNING MATERIAL SECURITY FITTINGS  807, R4 door leaf thickness 56-70 mm,
FASTENNING MATERIAL SECURITY FITTINGS  807, R4 door leaf thickness 71-85 mm,
FASTENNING MATERIAL SECURITY FITTINGS  807, R4 door leaf thickness

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

These security fittings are delivered:
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available (Fastenning material)

Cylinder must not protrude above the door surface more than 15,5

These security fittings are delivered :
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available (Fastenning material)

Cylinder must not protrude above the door surface more than 15,5

Security fittings for entry doors opening inwards as well as outward, suitable for door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available. We recommend to use a cylinder in security grade 3 which is resistant to drilling.

These security fittings are delivered :
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available (Fastenning material)

Cylinder must not protrude above the door surface more than 15,5

These security fittings are delivered in two options:
- including a security profile cylinder FAB DNs 200 with 5 keys, suitable for inwards opening doors with door leaf thickness of 38 – 45 mm
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness

These security fittings are delivered :
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness of 38 – 55 mm, extensions per 15 mm up to 100 mm available (Fastenning material)

Cylinder must not protrude above the door surface more than 15,5

FASTENNING MATERIAL SECURITY FITTINGS EL 1 door leaf thickness 40-50 mm, FASTENNING MATERIAL SECURITY FITTINGS EL 1 door leaf thickness 51-60 mm, FASTENNING MATERIAL SECURITY FITTINGS EL 1 door leaf thickness 61-70 mm, -after 5 mm up to 100 mm

FASTENNING MATERIAL SECURITY FITTINGS RN 1 door leaf thickness 38-50 mm, FASTENNING MATERIAL SECURITY FITTINGS RN 1 door leaf thickness 51-55 mm, FASTENNING MATERIAL SECURITY FITTINGS RN 1 door leaf thickness 56-60 mm, -after 5 mm up to 100 mm

FASTENNING MATERIAL SECURITY FITTINGS RX1 door leaf thickness 40-45 mm, FASTENNING MATERIAL SECURITY FITTINGS RX1 door leaf thickness 46-50 mm, FASTENNING MATERIAL SECURITY FITTINGS RX1 door leaf thickness 51-55 mm, -after 5 mm up to 100 mm

FASTENNING MATERIAL SECURITY FITTINGS RN1/H, RN1/S door leaf thickness 40-45 mm,
FASTENNING MATERIAL SECURITY FITTINGS RN1/H, RN1/S door leaf thickness 46-50 mm,
FASTENNING MATERIAL SECURITY FITTINGS RN1/H, RN1/S door leaf thickness 51-55 mm,

FASTENNING MATERIAL SECURITY FITTINGS RN1/H, RN1

FASTENNING MATERIAL SECURITY FITTINGS RN 4 door leaf thickness 38-50 mm, FASTENNING MATERIAL SECURITY FITTINGS RN 4 door leaf thickness 51-55 mm, FASTENNING MATERIAL SECURITY FITTINGS RN 4 door leaf thickness 56-60 mm, -after 5 mm up to 100 mm

Spindle for panic fittings handle-handle.

Spindle for panic fittings handle-handle.

These security fittings are delivered in two options:
- including a security profile cylinder FAB DNs 200 with 5 keys, suitable for inwards opening doors with door leaf thickness of 38 – 45 mm
- without a profile cylinder, suitable for inwards as well as outward opening doors with door leaf thickness